Intelligent standby list cleaner (ISLC) v1.0.3.2 Released (updated)

Post Reply
Terepin
Posts: 1
Joined: Sun Sep 22, 2019 1:37 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.8 Released

Post by Terepin »

Mine isn't working either. I tried troubleshooting tips in OP, but that didn't work. The too is running, but it's not purging anything.
Attachments
Komentár 2019-09-22 192847.png
Komentár 2019-09-22 192847.png (38.41 KiB) Viewed 418 times

Re: Intelligent standby list cleaner (ISLC) v1.0.1.8 Released

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.8 Released

Post by Wagnard »

Terepin wrote: Sun Sep 22, 2019 1:40 pm Mine isn't working either. I tried troubleshooting tips in OP, but that didn't work. The too is running, but it's not purging anything.
The second condition is not met (free memory must be lower than 1024)
vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by vmech »

Nice program!
But I have 2 questions about enhanced usability:
Can you split the «Start ISLC minimized and auto-Start monitoring» option into two independent options?
Can you add «Minimise to tray on Close pressed» option?
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by Wagnard »

vmech wrote: Thu Oct 03, 2019 6:38 am Nice program!
But I have 2 questions about enhanced usability:
Can you split the «Start ISLC minimized and auto-Start monitoring» option into two independent options?
Can you add «Minimise to tray on Close pressed» option?
Noted. Thanks for the feedback.
Lolka
Posts: 5
Joined: Thu Oct 03, 2019 8:23 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by Lolka »

Hello, Wagnard! Found a bug in the program, is that when you hover over the purge standby list timer resolution is reset.
And I also want to ask a question how this timer works, what is the profit from it?
vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by vmech »

I can supplement the previous post: Drawing tooltips over any program gui controls (where provided is) cause reset custom timer resolution to minimum resolution (15.625 ms) permanently.
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by Wagnard »

vmech wrote: Fri Oct 04, 2019 1:39 am I can supplement the previous post: Drawing tooltips over any program gui controls (where provided is) cause reset custom timer resolution to minimum resolution (15.625 ms) permanently.
Thanks, I'll try to repro and investigate why this happen.
ATRedline
Posts: 2
Joined: Fri Oct 04, 2019 6:32 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by ATRedline »

What can i do with such issue? It appeared after some instabillity in process of memory OC
Attachments
123.jpg
123.jpg (117.36 KiB) Viewed 388 times
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by Wagnard »

ATRedline wrote: Fri Oct 04, 2019 6:38 am What can i do with such issue? It appeared after some instabillity in process of memory OC
First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot

If still not working, we check if you have disabled performance counter and enable them

lodctr /q | find "Disabled"

lodctr /e:PerfOS

Probably need a reboot.
Per
Posts: 13
Joined: Sat Dec 29, 2018 12:54 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.9 Released

Post by Per »

Hello,
great work. Good idea to add option to easy logon start :idea: 8-)
Post Reply