Page 15 of 37

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Sat Jul 20, 2019 5:32 am
by thinkingemoji
Hi! Thanks for the tool, it's an amazing thing to have.
I noticed that a "memory polling rate" option has been added recently. Is this a value which I should just leave at the default setting (500ms)? Would it result in performance improvements or less stutters if I increased or decreased this value?
Again, thank you very much. :D

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Sat Jul 20, 2019 8:46 am
by whatISmemoryPOLLING
What is "Memory Polling Rate"??
It's default at 500 ms, but what the heck does it do? There's no answers anywhere, at least not that I could find.

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Sat Jul 20, 2019 11:04 am
by Wagnard
whatISmemoryPOLLING wrote: Sat Jul 20, 2019 8:46 am What is "Memory Polling Rate"??
It's default at 500 ms, but what the heck does it do? There's no answers anywhere, at least not that I could find.
viewtopic.php?f=18&t=2187#p4778

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Mon Aug 05, 2019 7:42 pm
by Showaz
I keep getting this Error: https://i.imgur.com/vcFFapx.png

I have already tried to troubleshooting methods below, and keep getting the same error."
First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot

If still not working, we check if you have disabled performance counter and enable them

lodctr /q | find "Disabled"

lodctr /e:PerfOS

Probably need a reboot.

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Wed Aug 07, 2019 1:50 am
by Wagnard
Showaz wrote: Mon Aug 05, 2019 7:42 pm I keep getting this Error: https://i.imgur.com/vcFFapx.png

I have already tried to troubleshooting methods below, and keep getting the same error."
First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot

If still not working, we check if you have disabled performance counter and enable them

lodctr /q | find "Disabled"

lodctr /e:PerfOS

Probably need a reboot.
Have you disabled some service ? Could be that you disabled 1 that is needed for ISLC.

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Fri Aug 09, 2019 3:07 am
by Showaz
Wagnard wrote: Wed Aug 07, 2019 1:50 am
Showaz wrote: Mon Aug 05, 2019 7:42 pm I keep getting this Error: https://i.imgur.com/vcFFapx.png

I have already tried to troubleshooting methods below, and keep getting the same error."
First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot

If still not working, we check if you have disabled performance counter and enable them

lodctr /q | find "Disabled"

lodctr /e:PerfOS

Probably need a reboot.
Have you disabled some service ? Could be that you disabled 1 that is needed for ISLC.
No, I haven't disabled anything.

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Fri Aug 09, 2019 12:04 pm
by Wagnard
Showaz wrote: Fri Aug 09, 2019 3:07 am
Wagnard wrote: Wed Aug 07, 2019 1:50 am
Showaz wrote: Mon Aug 05, 2019 7:42 pm I keep getting this Error: https://i.imgur.com/vcFFapx.png

I have already tried to troubleshooting methods below, and keep getting the same error."
Have you disabled some service ? Could be that you disabled 1 that is needed for ISLC.
No, I haven't disabled anything.
What does this command output (do it with a command prompt with admin privilege and caps are important)
lodctr /q | find "PerfOS"

Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released

Posted: Sat Aug 10, 2019 5:17 pm
by Showaz
Wagnard wrote: Fri Aug 09, 2019 12:04 pm
Showaz wrote: Fri Aug 09, 2019 3:07 am
Wagnard wrote: Wed Aug 07, 2019 1:50 am

Have you disabled some service ? Could be that you disabled 1 that is needed for ISLC.
No, I haven't disabled anything.
What does this command output (do it with a command prompt with admin privilege and caps are important)
lodctr /q | find "PerfOS"
Outputs all Performance Counters, (Enabled). When find"PerfOS", it finds [PerfsOS] Performance Counters (Enabled)

Re: Intelligent standby list cleaner (ISLC) v1.0.1.7 Released

Posted: Sun Aug 11, 2019 10:27 pm
by zlFrosT
Hi, I'm having a problem running ISLC
I get the following error

Image

Re: Intelligent standby list cleaner (ISLC) v1.0.1.7 Released

Posted: Sun Aug 11, 2019 10:55 pm
by Wagnard
zlFrosT wrote: Sun Aug 11, 2019 10:27 pm Hi, I'm having a problem running ISLC
I get the following error

Image
Try the commands on the readme.