Settings for 32GB

Post Reply
KWEE
Posts: 2
Joined: Sun Aug 01, 2021 3:37 am

Settings for 32GB

Post by KWEE »

Just wanted to know the best settings to use for the list size and free memory.

I notice timer resolution jumps from 0.9973ms to 15.6209ms is this normal?



default 1024/1024
polling rate 1000
timer resolution 0.50


Love the program by the way, Just upgraded to 32GB and wanna configure it right for gaming

I ran these commands in CMD

bcdedit /set useplatformtick yes

bcdedit /set disabledynamictick yes

bcdedit /deletevalue useplatformclock

Now I'm seeing 0.5 in current timer resolution. I hope this is a better way to configure it. I play Warzone and hear this helps with input lag and might gain some FPS as well

Settings for 32GB

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Settings for 32GB

Post by Wagnard »

KWEE wrote: Sun Aug 01, 2021 3:45 am Just wanted to know the best settings to use for the list size and free memory.

I notice timer resolution jumps from 0.9973ms to 15.6209ms is this normal?



default 1024/1024
polling rate 1000
timer resolution 0.50


Love the program by the way, Just upgraded to 32GB and wanna configure it right for gaming

I ran these commands in CMD

bcdedit /set useplatformtick yes

bcdedit /set disabledynamictick yes

bcdedit /deletevalue useplatformclock

Now I'm seeing 0.5 in current timer resolution. I hope this is a better way to configure it. I play Warzone and hear this helps with input lag and might gain some FPS as well
Hi, the timer jump is totally normal. It's how Windows work. As long as you have around 1ms in games (usually always the case)
KWEE
Posts: 2
Joined: Sun Aug 01, 2021 3:37 am

Re: Settings for 32GB

Post by KWEE »

Thanks for the reply, Should I keep the default settings for list size and free memory at 1024 or should you change this depending on GB size of ram in the system? I'm using 32GB right now so the defaults should give me the best results?
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Settings for 32GB

Post by Wagnard »

KWEE wrote: Sun Aug 01, 2021 7:22 pm Thanks for the reply, Should I keep the default settings for list size and free memory at 1024 or should you change this depending on GB size of ram in the system? I'm using 32GB right now so the defaults should give me the best results?
Yes, usually bellow 16gb is where we may need to adjust. But that depend on system ram usage.
Post Reply