Hello! I'm newbie

Here you can chat about anything as long as it is legal, respectful and that respect the rules
Post Reply
Posts: 1
Joined: Mon Dec 02, 2019 11:35 pm

Hello! I'm newbie

Post by kangnguyen »

The Three Most Common Problems Your Vacuum Cleaner Might Encounter & How to Fix Them

Our team at thekinglive.com has made a list of the three most commonly-encountered problems with vacuum cleaners of all shapes and sizes. We also provide you with some simple methods to temporarily get rid of these problems by yourself. In case you’ve tried all the methods given in this article and your vacuum cleaner still does not work correctly, it is high time to take your handheld vacuum to the repair shop for a thorough checkup!

Problem number 1 - Loss of suction

The problems with bagged vacuum cleaners usually lie in the machine’s bag. Therefore, if your vacuum is a bagged type, we recommend that you should check the bag firstly to see whether it’s full or not. A vacuum bag with holes or loose fitting could also be the main reason your vacuum is not working.

See also: Best Robotic Vacuum Cleaner Image

If you own a vacuum cleaner without bags, you should check the machine’s container to make sure that it does not need to be emptied. A quick check-up can also help identify whether the container is still tightly seated and ensure that there are no cracks – if you find at least one of these problems with your container then it’s time to fix or replace it.


The next reason that can lead to loss of suction in vacuum cleaners is that the filters are clogged with dust. Once the filters are clogged, the suction cannot work as accurately as when it isn’t clogged, or sometimes there is no suction coming from the vacuum at all.

Therefore, it is wise to check the filter once in awhile. If it is a washable filter, we recommend you to take it out and use plain water to clean it; no chemicals or cleaners are needed for this step. All you need to do is let the water run through the filter until the water comes out clean. Before you reinsert the filter, make sure you have dried it completely. Wet filters and vacuum cleaner motors do not go well together, as wetness can damage motors badly.

If your vacuum’s filter is made of paper, such as HEPA filters, it is best that you take the machine to a local retailer to get a suitable replacement filter.

★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★

Useful Reference: Image Best Rated Vacuum Cleaners Brands

★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★ ▬ ★

In case you have tried all the methods relating to the filters, and your vacuum cleaner still lacks suction, then the problem could be because of the hoses. Check the hoses for clogs. Most of them are designed so that they can be separated from the main unit and this makes things easier when you need to check if the hoses are clogged or not.

Problem number 2 – Beater bar stopped moving, or there is a burning smell when cleaning with your vacuum


The answer to these two problems could be that your vacuum cleaner’s belt has been broken and it needs to be replaced. Replacing a vacuum cleaner belt is an easy task, and belts can be purchased from most major retailers. The cost can vary for different models.

Problem number 3 - Vacuum stops working during use

The high-temperature protection function in most vacuum cleaners causes the machines motor to automatically shut off if it is overheated from working too long. This sensor helps save the motor from being damaged by the heat. When you connect the intake hose, this function can be triggered, causing the machine to stop working.

For handheld vacuum cleaners that run on battery power, the problem could be a loose connection at the battery. If this is the case, your hand vacuum needs a repair.


✶✶✶ Picked For You: https://www.kaggle.com/bestvacuumcleaners Image

Whether you own the latest designed bagless model or an old bagged vacuum cleaner, it is common knowledge that vacuum cleaners are one of the most used and favored appliances found in almost every home these days. Although the mechanics of vacuum cleaners might be simple, they can still encounter various problems that require repair or maintenance.
Last edited by kangnguyen on Fri Apr 03, 2020 11:47 pm, edited 1 time in total.

Hello! I'm newbie



User avatar
Site Admin
Posts: 1320
Joined: Sat Jul 04, 2015 5:18 pm

Re: Hello! I'm newbie

Post by Wagnard »

kangnguyen wrote: Mon Dec 02, 2019 11:37 pm Hi,
I'm Kang Nguyen, I'm happy to meet everybody.
Hi and welcome!

Shaun Mike
Posts: 15
Joined: Mon Dec 16, 2019 3:04 am

Re: Hello! I'm newbie

Post by Shaun Mike »

Hey, My name is Shaun Mike from New Zealand.

I just made a profile here to exchange some valuable information about technology, cleaning, etc.
I found a thread of this forum on google last night and seems really interesting.
The way you guys helping each other caught my attention and I feel that i can help somebody too with my limited knowledge about cleaning.
Please count me in as a new member and an active user. :)

Peace Out!!

Post Reply