Intelligent standby list cleaner (ISLC) v1.0.1.1 Released

Post Reply
jimmy_cr
Posts: 4
Joined: Wed Jan 23, 2019 2:43 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by jimmy_cr » Fri Jan 25, 2019 2:58 pm

OK, so I should use v1.0.0.5 then. Functionality should be almost the same it seems...

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 844
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by Wagnard » Fri Jan 25, 2019 3:29 pm

jimmy_cr wrote:
Fri Jan 25, 2019 2:58 pm
OK, so I should use v1.0.0.5 then. Functionality should be almost the same it seems...
It's similar, you can see the changes from the changelog on the first page on thisnforum thread

jimmy_cr
Posts: 4
Joined: Wed Jan 23, 2019 2:43 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by jimmy_cr » Sun Jan 27, 2019 11:06 am

Wagnard, I was able to run version 1.0.1.0 finally!! Here's how:

1) in elevated command prompt run

Code: Select all

lodctr /q | find "Disabled"
this will return for example:
[Outlook] Performance Counters (Disabled)
[PerfDisk] Performance Counters (Disabled)
[PerfOS] Performance Counters (Disabled)
2) in elevated command prompt run - in this example

Code: Select all

lodctr /e:Outlook
lodctr /e:PerfDisk
lodctr /e:PerfOS
so you have to run

Code: Select all

lodctr /e:XXXXXXXX
for every returned line where XXXXXXXX is word between square brackets [ ]

8-)

Thanks for the application!!

Edit: Outlook didnt changed to "enabled" in my enviroment, but doesn't matter :)
Last edited by jimmy_cr on Sun Jan 27, 2019 11:10 am, edited 1 time in total.

User avatar
Wagnard
Site Admin
Posts: 844
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by Wagnard » Sun Jan 27, 2019 11:09 am

jimmy_cr wrote:
Sun Jan 27, 2019 11:06 am
Wagnard, finally I was able to run version 1.0.1.0!! Here's how:

1) in elevated command prompt run

Code: Select all

lodctr /q | find "Disabled"
this will return for example:
[Outlook] Performance Counters (Disabled)
[PerfDisk] Performance Counters (Disabled)
[PerfOS] Performance Counters (Disabled)
2) in elevated command prompt run - in this example

Code: Select all

lodctr /e:Outlook
lodctr /e:PerfDisk
lodctr /e:PerfOS
so you have to run

Code: Select all

lodctr /e:XXXXXXXX
for every returned line where XXXXXXXX is word between square brackets [ ]

8-)

Thanks for the application!!

Edit: Outlook didnt changed to "enabled" in my enviroment, but doesn't matter :)
Hey man, glad you were able to sort this out!
And thanks for the trick and sharing!

Hack
Posts: 2
Joined: Wed Jan 30, 2019 12:53 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by Hack » Wed Jan 30, 2019 12:57 pm

Thanks for the program, but I'm wondering, is there a way for me to start the program automatically? I have made a task to start the program but I always have to manually click start. I'm wondering if you could add an option to have the program start activated?

User avatar
Wagnard
Site Admin
Posts: 844
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by Wagnard » Wed Jan 30, 2019 1:06 pm

Hack wrote:
Wed Jan 30, 2019 12:57 pm
Thanks for the program, but I'm wondering, is there a way for me to start the program automatically? I have made a task to start the program but I always have to manually click start. I'm wondering if you could add an option to have the program start activated?
There is one already, simply tick the tick box that say "start minimized" this will start activated

Hack
Posts: 2
Joined: Wed Jan 30, 2019 12:53 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by Hack » Thu Jan 31, 2019 2:28 pm

Wagnard wrote:
Wed Jan 30, 2019 1:06 pm
Hack wrote:
Wed Jan 30, 2019 12:57 pm
Thanks for the program, but I'm wondering, is there a way for me to start the program automatically? I have made a task to start the program but I always have to manually click start. I'm wondering if you could add an option to have the program start activated?
There is one already, simply tick the tick box that say "start minimized" this will start activated
Awesome, thanks!

luckerr
Posts: 1
Joined: Mon Nov 19, 2018 7:26 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by luckerr » Tue Feb 12, 2019 4:24 am

I just want to thank you .. for this standby cleaner. You saved my gaming experiance again. Very well done. Everyone told me that I am crazy about stuttering.. I changed almost every part in my PC last year and only this helped!! So, thank you very much.

notworking2344
Posts: 5
Joined: Thu Feb 21, 2019 11:37 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by notworking2344 » Thu Feb 21, 2019 11:40 am

This does not appear to be working. I wanted to use this in replacement of scheduling EmptyStandbyList.exe for every 5 minutes so it would rather seek the RAM hitting 1024MB. I have this automatically running as admin and I scheduled a task for it. Even manually launching as admin it does not clear at 1024MB. I am on 1809. Thanks.

User avatar
Wagnard
Site Admin
Posts: 844
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.0 Released

Post by Wagnard » Thu Feb 21, 2019 12:17 pm

notworking2344 wrote:
Thu Feb 21, 2019 11:40 am
This does not appear to be working. I wanted to use this in replacement of scheduling EmptyStandbyList.exe for every 5 minutes so it would rather seek the RAM hitting 1024MB. I have this automatically running as admin and I scheduled a task for it. Even manually launching as admin it does not clear at 1024MB. I am on 1809. Thanks.
Take a picture of my app, at the moment you think it is suppose to work and post it here

Post Reply