Intelligent standby list cleaner (ISLC) v1.0.3.2 Released (updated)
-
- Posts: 1
- Joined: Thu Jul 04, 2019 12:30 pm
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
Is this a known issue on the older version?
(seems to happen a lot when updating big[?] Steam games)
(seems to happen a lot when updating big[?] Steam games)
- Wagnard
- Site Admin
- Posts: 1681
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
Humm never encountered this on my end.
If you can repro this and also give me a screenshot of task manager memory usage.
But before that, use the latest version as this could. Be an old and resolved issue.
Thanks
-
- Posts: 2
- Joined: Thu Jul 04, 2019 7:06 pm
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
In the version v1.0.1.3, the Polling Rate is for the mouse? Why Polling Rate(ms) instead of Polling Rate (Hz)?
I tested it with Logitech G203 and polling rate doesnt change, stuck in 1000hz always.
Thank you for this nice piece of software.
I tested it with Logitech G203 and polling rate doesnt change, stuck in 1000hz always.
Thank you for this nice piece of software.
- Wagnard
- Site Admin
- Posts: 1681
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
No not at all, it's the rate that the application will check the memory status.
-
- Posts: 2
- Joined: Thu Jul 04, 2019 7:06 pm
-
- Posts: 2
- Joined: Fri Jul 05, 2019 5:43 am
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
I decided to use this program, it works, but does not want to clean automatically, but manually everything works fine, I tried version 2 1.0.1.0 and 1.0.1.3 and only manual cleaning works there and there, what can I do?
- Attachments
-
- 123.PNG (25.74 KiB) Viewed 1828 times
- Wagnard
- Site Admin
- Posts: 1681
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
From the screenshot, it is normal it doesn't clean, you have more than 1024mb free memory.
Both conditions must be met.
-
- Posts: 2
- Joined: Fri Jul 05, 2019 5:43 am
Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released
-
- Posts: 1
- Joined: Wed Jul 10, 2019 8:04 am
Re: Intelligent standby list cleaner (ISLC) v1.0.1.5 Released
Hi, thanks for the tool. I used to clear the standby list when needed with Sysinternals' Rammap, but this is much easier.
I have a small typo to report, see the yellow marked part in the screenshot below.
I have a small typo to report, see the yellow marked part in the screenshot below.
- Wagnard
- Site Admin
- Posts: 1681
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact: