Intelligent standby list cleaner (ISLC) v1.0.3.2 Released (updated)
-
- Posts: 1
- Joined: Sat Jul 20, 2019 5:26 am
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
Hi! Thanks for the tool, it's an amazing thing to have.
I noticed that a "memory polling rate" option has been added recently. Is this a value which I should just leave at the default setting (500ms)? Would it result in performance improvements or less stutters if I increased or decreased this value?
Again, thank you very much.
I noticed that a "memory polling rate" option has been added recently. Is this a value which I should just leave at the default setting (500ms)? Would it result in performance improvements or less stutters if I increased or decreased this value?
Again, thank you very much.
-
- Posts: 2
- Joined: Sat Jul 20, 2019 8:44 am
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
What is "Memory Polling Rate"??
It's default at 500 ms, but what the heck does it do? There's no answers anywhere, at least not that I could find.
It's default at 500 ms, but what the heck does it do? There's no answers anywhere, at least not that I could find.
- Wagnard
- Site Admin
- Posts: 1682
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
viewtopic.php?f=18&t=2187#p4778whatISmemoryPOLLING wrote: ↑Sat Jul 20, 2019 8:46 am What is "Memory Polling Rate"??
It's default at 500 ms, but what the heck does it do? There's no answers anywhere, at least not that I could find.
-
- Posts: 3
- Joined: Mon Aug 05, 2019 7:32 pm
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
I keep getting this Error: https://i.imgur.com/vcFFapx.png
I have already tried to troubleshooting methods below, and keep getting the same error."
I have already tried to troubleshooting methods below, and keep getting the same error."
First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot
If still not working, we check if you have disabled performance counter and enable them
lodctr /q | find "Disabled"
lodctr /e:PerfOS
Probably need a reboot.
- Wagnard
- Site Admin
- Posts: 1682
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
Have you disabled some service ? Could be that you disabled 1 that is needed for ISLC.Showaz wrote: ↑Mon Aug 05, 2019 7:42 pm I keep getting this Error: https://i.imgur.com/vcFFapx.png
I have already tried to troubleshooting methods below, and keep getting the same error."First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot
If still not working, we check if you have disabled performance counter and enable them
lodctr /q | find "Disabled"
lodctr /e:PerfOS
Probably need a reboot.
-
- Posts: 3
- Joined: Mon Aug 05, 2019 7:32 pm
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
No, I haven't disabled anything.Wagnard wrote: ↑Wed Aug 07, 2019 1:50 amHave you disabled some service ? Could be that you disabled 1 that is needed for ISLC.Showaz wrote: ↑Mon Aug 05, 2019 7:42 pm I keep getting this Error: https://i.imgur.com/vcFFapx.png
I have already tried to troubleshooting methods below, and keep getting the same error."First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot
If still not working, we check if you have disabled performance counter and enable them
lodctr /q | find "Disabled"
lodctr /e:PerfOS
Probably need a reboot.
- Wagnard
- Site Admin
- Posts: 1682
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
What does this command output (do it with a command prompt with admin privilege and caps are important)Showaz wrote: ↑Fri Aug 09, 2019 3:07 amNo, I haven't disabled anything.Wagnard wrote: ↑Wed Aug 07, 2019 1:50 amHave you disabled some service ? Could be that you disabled 1 that is needed for ISLC.Showaz wrote: ↑Mon Aug 05, 2019 7:42 pm I keep getting this Error: https://i.imgur.com/vcFFapx.png
I have already tried to troubleshooting methods below, and keep getting the same error."
lodctr /q | find "PerfOS"
-
- Posts: 3
- Joined: Mon Aug 05, 2019 7:32 pm
Re: Intelligent standby list cleaner (ISLC) v1.0.1.6 Released
-
- Posts: 6
- Joined: Sun Aug 11, 2019 10:09 pm
Re: Intelligent standby list cleaner (ISLC) v1.0.1.7 Released
Hi, I'm having a problem running ISLC
I get the following error
I get the following error
- Wagnard
- Site Admin
- Posts: 1682
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact: