time resolution : 0.4882ms
-
- Posts: 2
- Joined: Fri Dec 20, 2019 6:35 pm
time resolution : 0.4882ms
Is there a way to get time resolution to 0.50ms is was working fine before on same pc. I re installed windows 10 and cant get time resolution to change from this 0.4882ms. Need help, any advice will be appreciated.
-
- Posts: 1
- Joined: Mon Dec 30, 2019 9:55 am
Re: time resolution : 0.4882ms
Enable HPET in bios (if it's disabled)
run CMD with admin privileges and type these commands
bcdedit /set useplatformtick yes
bcdedit /deletevalue useplatformclock
rr pc
first one will force the clock to be backed by a platform source
second will set useplatformclock (hpet) to default (don't mess with that one - on "yes" system will run like shit but some programs may use this timer)
for me it's going to 0.5 from 0.45959
-
- Posts: 1
- Joined: Thu Nov 25, 2021 6:10 am
Re: time resolution : 0.4882ms
leave it as is. latency results show that lower than 0.5ms in modern systems makes it a tinier bit more snappy and responsive. i have 0.4988ms and dynamic tick is deleted as well