Wondering if I have to change anything in current timer resolution: 0.496ms

Convergence
Posts: 5
Joined: Thu Mar 24, 2022 10:47 pm

Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Convergence »

Sometimes I'm having a random stutters, no idea from where it came, I wonder if you can help
Here is screenshot: https://imgur.com/a/8Lo07oz

Wondering if I have to change anything in current timer resolution: 0.496ms

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Wagnard »

Convergence wrote: Thu Mar 24, 2022 10:50 pm Sometimes I'm having a random stutters, no idea from where it came, I wonder if you can help
Here is screenshot: https://imgur.com/a/8Lo07oz
Hi,
1 thing I can say is that for 16Gb ram 8192 is WAY too high for the free memory options. you should use the default values (1024) there were selected especially for 16GB ram
Convergence
Posts: 5
Joined: Thu Mar 24, 2022 10:47 pm

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Convergence »

Whoops! It worked fine now as smooth. I didn't know about memory thing. I was stupid all those time since I use islc for the long time.... thank you very much man.

Last thing to get enough info I would like to hear your suggestions to make it enough better like if there anything needs to change or so with polling rate or leave it as 1000 or anything else?

Apologies for my english.
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Wagnard »

Convergence wrote: Fri Mar 25, 2022 8:47 am Whoops! It worked fine now as smooth. I didn't know about memory thing. I was stupid all those time since I use islc for the long time.... thank you very much man.

Last thing to get enough info I would like to hear your suggestions to make it enough better like if there anything needs to change or so with polling rate or leave it as 1000 or anything else?

Apologies for my english.
Pooling at 1000 is usually the best for everyone. Pooling faster means more CPU usage by ISLC, usually 1 check every sec should be enough for ISLC to do its job.
Convergence
Posts: 5
Joined: Thu Mar 24, 2022 10:47 pm

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Convergence »

Thank you buddy you saved me. Now I can pretty play easier now
Convergence
Posts: 5
Joined: Thu Mar 24, 2022 10:47 pm

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Convergence »

Wagnard wrote: Fri Mar 25, 2022 8:54 am
Convergence wrote: Fri Mar 25, 2022 8:47 am Whoops! It worked fine now as smooth. I didn't know about memory thing. I was stupid all those time since I use islc for the long time.... thank you very much man.

Last thing to get enough info I would like to hear your suggestions to make it enough better like if there anything needs to change or so with polling rate or leave it as 1000 or anything else?

Apologies for my english.
Pooling at 1000 is usually the best for everyone. Pooling faster means more CPU usage by ISLC, usually 1 check every sec should be enough for ISLC to do its job.
Don't you think it must be clean every 5 mins or so? (to get enough free memory)

Here a screenshot: https://imgur.com/a/qhRrMFC
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Wagnard »

Convergence wrote: Sat Mar 26, 2022 2:02 pm
Wagnard wrote: Fri Mar 25, 2022 8:54 am
Convergence wrote: Fri Mar 25, 2022 8:47 am Whoops! It worked fine now as smooth. I didn't know about memory thing. I was stupid all those time since I use islc for the long time.... thank you very much man.

Last thing to get enough info I would like to hear your suggestions to make it enough better like if there anything needs to change or so with polling rate or leave it as 1000 or anything else?

Apologies for my english.
Pooling at 1000 is usually the best for everyone. Pooling faster means more CPU usage by ISLC, usually 1 check every sec should be enough for ISLC to do its job.
Don't you think it must be clean every 5 mins or so? (to get enough free memory)

Here a screenshot: https://imgur.com/a/qhRrMFC
That depends of what run on your system, you could maybe lower to 512MB (for the second box) and see if it cleans a little less.
Convergence
Posts: 5
Joined: Thu Mar 24, 2022 10:47 pm

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Convergence »

Atm Im facing with input lag, how to solve it? It was good this morning. :oops:
agelababypo
Posts: 1
Joined: Fri Apr 29, 2022 4:30 am

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by agelababypo »

The only thing is my current timer resolution is shown as 0.496ms even though I have it set to 0.50ms. Is this an issue? paper.io 2 build now gg
User avatar
Parisien_entraide
Posts: 24
Joined: Fri Aug 27, 2021 9:04 am
Location: Paris FRANCE
Contact:

Re: Wondering if I have to change anything in current timer resolution: 0.496ms

Post by Parisien_entraide »

agelababypo wrote: Fri Apr 29, 2022 4:33 am The only thing is my current timer resolution is shown as 0.496ms even though I have it set to 0.50ms. Is this an issue? paper.io 2 build now gg
Or.. Read the FAQ :-)

viewtopic.php?t=3918
Only Amiga.. Was possible :-)
DDU in French https://forum.malekal.com/viewtopic.php?p=535001#p535001
ISLC and more in French : https://forum.malekal.com/viewtopic.php?t=62286
WagnardTools in French : https://forum.malekal.com/viewtopic.php?t=69498
Post Reply