Page 1 of 5
[1.0.2.x] Issue purging SBL with exclusion list
Posted: Tue May 03, 2022 1:51 pm
by vmech
After starting a process from ISLC exclusion list, followed by termination of this process, ISLC stops regular purging of standby lists until the Start/Stop is pressed, or ISLC is restarted.
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Thu May 05, 2022 6:22 am
by Wagnard
vmech wrote: ↑Tue May 03, 2022 1:51 pm
After starting a process from ISLC exclusion list, followed by termination of this process, ISLC stops regular purging of standby lists until the Start/Stop is pressed, or ISLC is restarted.
Hi, thanks for the report, I will investigate.
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Wed May 11, 2022 2:52 am
by Wagnard
vmech wrote: ↑Tue May 03, 2022 1:51 pm
After starting a process from ISLC exclusion list, followed by termination of this process, ISLC stops regular purging of standby lists until the Start/Stop is pressed, or ISLC is restarted.
Should be fixed with 1.0.2.7
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Thu May 12, 2022 6:33 pm
by vmech
Wagnard wrote: ↑Wed May 11, 2022 2:52 am
vmech wrote: ↑Tue May 03, 2022 1:51 pm
After starting a process from ISLC exclusion list, followed by termination of this process, ISLC stops regular purging of standby lists until the Start/Stop is pressed, or ISLC is restarted.
Should be fixed with 1.0.2.7
Thanks, now exclusion list is working as expected.
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Tue May 17, 2022 11:26 pm
by vmech
vmech wrote: ↑Thu May 12, 2022 6:33 pm
Wagnard wrote: ↑Wed May 11, 2022 2:52 am
vmech wrote: ↑Tue May 03, 2022 1:51 pm
After starting a process from ISLC exclusion list, followed by termination of this process, ISLC stops regular purging of standby lists until the Start/Stop is pressed, or ISLC is restarted.
Should be fixed with 1.0.2.7
Thanks, now exclusion list is working as expected.
Nope. Not fixed fully
PS. The screenshot state was preceded by multiple launches during the day of application from exclusion list, with long periods of use (several hours in a row).
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Tue May 17, 2022 11:54 pm
by Wagnard
vmech wrote: ↑Tue May 17, 2022 11:26 pm
vmech wrote: ↑Thu May 12, 2022 6:33 pm
Wagnard wrote: ↑Wed May 11, 2022 2:52 am
Should be fixed with 1.0.2.7
Thanks, now exclusion list is working as expected.
Nope. Not fixed fully
PS. The screenshot state was preceded by multiple launches during the day of application from exclusion list, with long periods of use (several hours in a row).
At the time of the screeshot, no application in the exclusion list was running? You must be 100% certain that there were no process active
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Wed May 18, 2022 12:04 am
by vmech
Wagnard wrote: ↑Tue May 17, 2022 11:54 pm
vmech wrote: ↑Tue May 17, 2022 11:26 pm
vmech wrote: ↑Thu May 12, 2022 6:33 pm
Thanks, now exclusion list is working as expected.
Nope. Not fixed fully
PS. The screenshot state was preceded by multiple launches during the day of application from exclusion list, with long periods of use (several hours in a row).
At the time of the screeshot, no application in the exclusion list was running? You must be 100% certain that there were no process active
No, application didn't start, and it didn't freeze in processes. The purity of the experiment is observed (I myself was surprised by what happened, before I was upset).
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Wed May 18, 2022 12:07 am
by Wagnard
vmech wrote: ↑Wed May 18, 2022 12:04 am
Wagnard wrote: ↑Tue May 17, 2022 11:54 pm
vmech wrote: ↑Tue May 17, 2022 11:26 pm
Nope. Not fixed fully
PS. The screenshot state was preceded by multiple launches during the day of application from exclusion list, with long periods of use (several hours in a row).
At the time of the screeshot, no application in the exclusion list was running? You must be 100% certain that there were no process active
No, application didn't start, and it didn't freeze in processes. The purity of the experiment is observed (I myself was surprised by what happened, before I was upset).
I'll investigate more than, maybe there is another bug somewhere.
Just so I can repro appropriately on my end, how many items you have in the exclusion list ?
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Wed May 18, 2022 12:17 am
by vmech
Wagnard wrote: ↑Wed May 18, 2022 12:07 am
I'll investigate more than, maybe there is another bug somewhere.
Just so I can repro appropriately on my end, how many items you have in the exclusion list ?
One - vmplayer.exe.
It may be worth noting that between last usage of vmplayer.exe and the discovery of a ISLC dysfunction, the computer was in sleep mode. Normal sleep, not hibernation (hybrid sleep is also disabled).
Re: [1.0.2.x] Issue purging SBL with exclusion list
Posted: Wed May 18, 2022 12:18 am
by Wagnard
vmech wrote: ↑Wed May 18, 2022 12:17 am
Wagnard wrote: ↑Wed May 18, 2022 12:07 am
I'll investigate more than, maybe there is another bug somewhere.
Just so I can repro appropriately on my end, how many items you have in the exclusion list ?
One - vmplayer.exe.
It may be worth noting that between last usage of vmplayer.exe and the discovery of a ISLC dysfunction, the computer was in sleep mode. Normal sleep, not hibernation (hybrid sleep is also disabled).
Interesting, this may be a clue.
Thanks
Edit: Do you remember if vmplayer.exe was open when the computer went to sleep ?