[1.0.2.x] Issue purging SBL with exclusion list

vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by vmech »

Wagnard wrote: Sun May 29, 2022 1:37 pm There is a question quite obvious I didn't ask you...
Windows 10 or Windows 11 ?

I updated with the experimental fix: https://www.wagnardsoft.com/ISLC/ISLC%20v1.0.2.8.exe
Windows 10 version 1809 64-bit [10.0.17763.2686 (March 2022)]

Re: [1.0.2.x] Issue purging SBL with exclusion list

Sponsor

Sponsor
 

vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by vmech »

Wagnard wrote: Sun May 29, 2022 1:37 pm There is a question quite obvious I didn't ask you...
Windows 10 or Windows 11 ?

I updated with the experimental fix: https://www.wagnardsoft.com/ISLC/ISLC%20v1.0.2.8.exe
This version is even less workable than previous one. Symptoms and behavior are the same, except that after manually pressing Start/Stop button, purging does not occur. At all. A full program restart is required.
vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by vmech »

vmech wrote: Wed Jun 01, 2022 4:06 am This version is even less workable than previous one. Symptoms and behavior are the same, except that after manually pressing Start/Stop button, purging does not occur. At all. A full program restart is required.
And after program restarting purging does not work... Very strange.
Also, purging does not work when conditions are met. Only if you force the purging to start with «Purging» button.
Latest version is unusable. I rolled back to the previous 1.0.2.8.
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by Wagnard »

vmech wrote: Wed Jun 01, 2022 4:18 am
vmech wrote: Wed Jun 01, 2022 4:06 am This version is even less workable than previous one. Symptoms and behavior are the same, except that after manually pressing Start/Stop button, purging does not occur. At all. A full program restart is required.
And after program restarting purging does not work... Very strange.
Also, purging does not work when conditions are met. Only if you force the purging to start with «Purging» button.
Latest version is unusable. I rolled back to the previous 1.0.2.8.
Thanks, its possible there is a mistake somewhere, I made a lot of changes.it sure is weird that even after program restarting it doesn't work. Double check the values you entered. I'll do some check on my end too.
Exception was at 0 when it didn't want to purge?
vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by vmech »

Wagnard wrote: Wed Jun 01, 2022 4:52 pm Thanks, its possible there is a mistake somewhere, I made a lot of changes.it sure is weird that even after program restarting it doesn't work. Double check the values you entered. I'll do some check on my end too.
Exception was at 0 when it didn't want to purge?
I don't touch configuration file, I update only .exe/.pdb files (just extracting files from sfx-archive in FAR ;) ).
Damn, I didn't remember status of counter at the time of failure. But after program restarting the counter was definitely at 0.
lazxrxuri1
Posts: 1
Joined: Thu Jun 02, 2022 3:21 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by lazxrxuri1 »

useful information
Last edited by lazxrxuri1 on Mon Jun 06, 2022 9:37 am, edited 2 times in total.
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by Wagnard »

vmech wrote: Wed Jun 01, 2022 7:49 pm
Wagnard wrote: Wed Jun 01, 2022 4:52 pm Thanks, its possible there is a mistake somewhere, I made a lot of changes.it sure is weird that even after program restarting it doesn't work. Double check the values you entered. I'll do some check on my end too.
Exception was at 0 when it didn't want to purge?
I don't touch configuration file, I update only .exe/.pdb files (just extracting files from sfx-archive in FAR ;) ).
Damn, I didn't remember status of counter at the time of failure. But after program restarting the counter was definitely at 0.
OK thanks, I'll do extensive testing here than.
User avatar
Wagnard
Site Admin
Posts: 1675
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by Wagnard »

I found the problem, it was from the way I compiled my code.
You can download the file again, it will be working correctly this time.

https://www.wagnardsoft.com/ISLC/ISLC%20v1.0.2.8V2.exe
vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by vmech »

Wagnard wrote: Sat Jun 04, 2022 9:44 am I found the problem, it was from the way I compiled my code.
You can download the file again, it will be working correctly this time.

https://www.wagnardsoft.com/ISLC/ISLC%20v1.0.2.8V2.exe
Thanks, I'll try to test it tomorrow.
vmech
Posts: 31
Joined: Thu Oct 03, 2019 6:31 am

Re: [1.0.2.x] Issue purging SBL with exclusion list

Post by vmech »

Wagnard wrote: Sat Jun 04, 2022 9:44 am I found the problem, it was from the way I compiled my code.
You can download the file again, it will be working correctly this time.
:arrow: So far, everything is working.

Today I'll observe more and try to share results by the evening.
Post Reply