Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

ymv42868
Posts: 1
Joined: Mon Dec 16, 2019 5:23 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by ymv42868 »

User77 wrote:
Sun Dec 08, 2019 1:58 pm
Hello guys,
so i have been using the ISLC for a bit now and it seems that everytime that I try to play a game (f.e BFV) my computer suddenly crashes and my PC starts to reboot itself. Any tips on how to fix this ?
Hi there, I have observed this same behavior. I have not researched the root cause yet, but it seems to occur in very high memory usage scenarios (ex. standby/working set clears with <2 GB memory free, which is then consumed by memory intensive applications like a game). Adjusting the page file size does not seem to matter in this case, and it is not a fault of overclocking or running XMP, etc. Perhaps adjusting the parameters of ISLC would help, but I have not tested yet and I'm not sure it would help the issue anyways.

Try running a utility that will display your memory usage and keep your eyes on it while gaming and such, and see if you crash when approaching your RAM's capacity. It is a fairly reproducible issue so for now, I have simply opted to not run ISLC in such scenarios.

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Sponsor

Sponsor
 

Khaled1323
Posts: 2
Joined: Thu Jan 16, 2020 4:57 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Khaled1323 »

How can i fix this

Image

User avatar
Wagnard
Site Admin
Posts: 1081
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Wagnard »

Khaled1323 wrote:
Thu Jan 16, 2020 4:58 pm
How can i fix this

Image
Hi,
Check the faq or bottom of the first post, you have to do the lodctr command.

Khaled1323
Posts: 2
Joined: Thu Jan 16, 2020 4:57 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Khaled1323 »

Wagnard wrote:
Thu Jan 16, 2020 5:07 pm
Khaled1323 wrote:
Thu Jan 16, 2020 4:58 pm
How can i fix this

Image
Hi,
Check the faq or bottom of the first post, you have to do the lodctr command.
sorry for the inconvenience. It is running now.

User avatar
Wagnard
Site Admin
Posts: 1081
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Wagnard »

Khaled1323 wrote:
Thu Jan 16, 2020 5:11 pm
Wagnard wrote:
Thu Jan 16, 2020 5:07 pm
Khaled1323 wrote:
Thu Jan 16, 2020 4:58 pm
How can i fix this

Image
Hi,
Check the faq or bottom of the first post, you have to do the lodctr command.
sorry for the inconvenience. It is running now.
No problem, I'm here to help. ;)

Kleenex
Posts: 1
Joined: Thu Jan 16, 2020 11:50 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Kleenex »

Hello,

After doing the listed commands in the FAQ and checked that all the counters are "enabled", I still get this error message :

Image

Is there any way to fix it?

Thanks

User avatar
Wagnard
Site Admin
Posts: 1081
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Wagnard »

Kleenex wrote:
Thu Jan 16, 2020 11:57 pm
Hello,

After doing the listed commands in the FAQ and checked that all the counters are "enabled", I still get this error message :

Image

Is there any way to fix it?

Thanks
Hi,
Sadly for this one, the only known solution is to reinstall your Windows. Something is broken with your system counter,

User avatar
NoirAngel
Posts: 1
Joined: Fri Jan 17, 2020 12:15 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by NoirAngel »

Wagnard wrote:
Sat Nov 09, 2019 8:05 am
4r0 wrote:
Sat Nov 09, 2019 7:24 am
Running ISLC prevents Ryzen Master from installing and running.
Closing ISLC fixes the problem.
I was able to install it with ISLC running.
I will need more details and the error that you got.

Also I can't run it as i don't have a Ryzen. But was still able to have install it with ISLC running.
No issues here running it with ISLC enabled

Image
AMD Ryzen 7 1700x/ASRock X370 Taichi/8GB RX480/32GB Corsair Vengeance LPX

MAAR
Posts: 1
Joined: Mon Jan 27, 2020 7:09 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by MAAR »

Wagnard wrote:
Fri Jan 17, 2020 9:55 am
Kleenex wrote:
Thu Jan 16, 2020 11:57 pm
Hello,

After doing the listed commands in the FAQ and checked that all the counters are "enabled", I still get this error message :

Image

Is there any way to fix it?

Thanks
Hi,
Sadly for this one, the only known solution is to reinstall your Windows. Something is broken with your system counter,
Hi

I have the same problem and found a solution

Go to Registry Editor

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib

Disable Performance Counters and change 1 to 0

this solution fix the problem for me

User avatar
Wagnard
Site Admin
Posts: 1081
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Wagnard »

MAAR wrote:
Mon Jan 27, 2020 7:17 pm
Wagnard wrote:
Fri Jan 17, 2020 9:55 am
Kleenex wrote:
Thu Jan 16, 2020 11:57 pm
Hello,

After doing the listed commands in the FAQ and checked that all the counters are "enabled", I still get this error message :

Image

Is there any way to fix it?

Thanks
Hi,
Sadly for this one, the only known solution is to reinstall your Windows. Something is broken with your system counter,
Hi

I have the same problem and found a solution

Go to Registry Editor

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib

Disable Performance Counters and change 1 to 0

this solution fix the problem for me
Thanks or the tip,
Highly appreciated

Post Reply