Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

nhatlam96
Posts: 1
Joined: Mon Feb 10, 2020 11:32 am

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by nhatlam96 »

Doesnt matter what settings I use, I always get: "You have entered invalid data."

I fixed the problem.
I downloaded the version 1.0.1.1 and used the same exact settings, now it works.
Still doesnt work on 1.0.2.1 tho :(
Last edited by nhatlam96 on Mon Feb 10, 2020 11:38 am, edited 1 time in total.

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 1076
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Wagnard »

nhatlam96 wrote:
Mon Feb 10, 2020 11:33 am
Doesnt matter what settings I use, I always get: "You have entered invalid data."

I fixed the problem.
I downloaded the version 1.0.1.1 and used the same exact settings, now it works.
Still doesnt work on 1.0.2.1 tho :(
Screenshot of what you are trying to enter?

99lool
Posts: 1
Joined: Wed Feb 12, 2020 11:38 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by 99lool »

MAAR wrote:
Mon Jan 27, 2020 7:17 pm
Wagnard wrote:
Fri Jan 17, 2020 9:55 am
Kleenex wrote:
Thu Jan 16, 2020 11:57 pm
Hello,

After doing the listed commands in the FAQ and checked that all the counters are "enabled", I still get this error message :

Image

Is there any way to fix it?

Thanks
Hi,
Sadly for this one, the only known solution is to reinstall your Windows. Something is broken with your system counter,
Hi

I have the same problem and found a solution

Go to Registry Editor

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib

Disable Performance Counters and change 1 to 0

this solution fix the problem for me
Thanks this worked for me

almzqq
Posts: 2
Joined: Thu Feb 13, 2020 3:12 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by almzqq »

Hello help with this. I recently reinstalled Windows, I downloaded the application and it does not start. Windows 10 ltsc
You do not have the required permissions to view the files attached to this post.

User avatar
Wagnard
Site Admin
Posts: 1076
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post by Wagnard »

almzqq wrote:
Thu Feb 13, 2020 4:34 pm
Hello help with this. I recently reinstalled Windows, I downloaded the application and it does not start. Windows 10 ltsc
Try theses:
If you have issue running it.

First : Run in a CMD (command prompt with admin privilege) 2 times :
LODCTR /R and reboot

If still not working, we check if you have disabled performance counter and enable them

lodctr /q | find "Disabled"

lodctr /e:PerfOS

Probably need a reboot.

almzqq
Posts: 2
Joined: Thu Feb 13, 2020 3:12 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

Post by almzqq »

Thank you so much, I was looking for a solution I could not find. This application is just a gun.

yukki
Posts: 1
Joined: Sun Mar 15, 2020 5:54 am

Re: Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

Post by yukki »

any way to fix this?
Безымянный.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by yukki on Sun Mar 15, 2020 6:59 am, edited 1 time in total.

User avatar
Wagnard
Site Admin
Posts: 1076
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

Post by Wagnard »

yukki wrote:
Sun Mar 15, 2020 6:10 am
any way to fix this?
Безымянный.jpg
Yes, mentioned a few time in this thread, check post with the LODCTR command.

Relax
Posts: 3
Joined: Wed Apr 01, 2020 7:27 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

Post by Relax »

Why is it not clearing the standby list automatically? Both conditions are fulfilled yet purging only works when manually pressed, otherwise I'll game for 2hrs and it never purges. https://i.imgur.com/ERC5FMW.png

EDIT: oh nvm, I added software to exclusion list thinking it's meant to be added so that ISLC doesn't close it. Not it works.

What's the exclusion list meant for tho? I mean I understand what it does, but what scenario is it useful for?
Last edited by Relax on Wed Apr 01, 2020 7:35 pm, edited 1 time in total.

User avatar
Wagnard
Site Admin
Posts: 1076
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.2.2 Released

Post by Wagnard »

Relax wrote:
Wed Apr 01, 2020 7:30 pm
Why is it not clearing the standby list automatically? Both conditions are fulfilled yet purging only works when manually pressed, otherwise I'll game for 2hrs and it never purges. https://i.imgur.com/ERC5FMW.png

EDIT: oh nvm, I added software to exclusion list thinking it's meant to be added so that ISLC doesn't close it. Not it works.

What's the exclusion list meant for tho? I mean I understand what it does, but what scenario is it useful for?
Hi, the exclusion list prevent ISLC to purge when a process in that list is running.

Post Reply