Intelligent standby list cleaner (ISLC) v1.0.3.6 Released

[drimez]

That's weird, try to not start ISLC when the pc start and se if the issue is still there. Because usually this is caused by something else.

Without ISLC this doesn't happen, it freezes when the software starts (only when turning it on for the first time automatically).

Verify if it's the custom timer or really just ISLC.
You could also go into task scheduler and modify the task created by ISLC and put a bit more delay to the startup of ISLC.

It's 100% custom timer!

[Wagnard]

Without ISLC this doesn't happen, it freezes when the software starts (only when turning it on for the first time automatically).

Verify if it's the custom timer or really just ISLC.
You could also go into task scheduler and modify the task created by ISLC and put a bit more delay to the startup of ISLC.

It's 100% custom timer!

What happen when you manually start ISLC ? ( When not set to run automatically )

[x8009]

for some weird reason this software makes Razer Ferjya haptic stop working randomly, causing unsynced sound and lower vibration. I didn't use the software for 2 months and it didn't happen once, just couple hours I ran it, and it happened 3 times. a straight windows restart ISLC not running and it didn't happen.

custom timer unchecked
global thingy checked

[Wagnard]

for some weird reason this software makes Razer Ferjya haptic stop working randomly, causing unsynced sound and lower vibration. I didn't use the software for 2 months and it didn't happen once, just couple hours I ran it, and it happened 3 times. a straight windows restart ISLC not running and it didn't happen.

custom timer unchecked
global thingy checked

See if it happen when it purge the memory

[x8009]

for some weird reason this software makes Razer Ferjya haptic stop working randomly, causing unsynced sound and lower vibration. I didn't use the software for 2 months and it didn't happen once, just couple hours I ran it, and it happened 3 times. a straight windows restart ISLC not running and it didn't happen.

custom timer unchecked
global thingy checked

See if it happen when it purge the memory

I think it could be, but it doesn't happen at the same moment, it might happen after some time, maybe it's releasing the memory from the Software/Capturing memory that Razer Chroma is using, I can fix that by changing the sound output from the Speakers to Digital, it happens on both anyway so it's not related to one of them, I also tested 5 different soundcards.

maybe I need to exclude the Chroma software? but it has so many processes that running I won't know which one of them

[x8009]

for some weird reason this software makes Razer Ferjya haptic stop working randomly, causing unsynced sound and lower vibration. I didn't use the software for 2 months and it didn't happen once, just couple hours I ran it, and it happened 3 times. a straight windows restart ISLC not running and it didn't happen.

custom timer unchecked
global thingy checked

See if it happen when it purge the memory

could you add maybe a folder that add all the EXE in the folder instead adding one by one? it should make my life so much easier just adding the RAZER folders and the program should just pick all EXE not to release them from memory because I have no other way.

So it's not possible to release purge the memory when those specific services or EXE files running? damn the program is unusable because those services will always run to use the Razer Haptic Frejya, it doesn't work without it, and clearing the ram makes it stop working as it buffer some memory to the audio

[Wagnard]

for some weird reason this software makes Razer Ferjya haptic stop working randomly, causing unsynced sound and lower vibration. I didn't use the software for 2 months and it didn't happen once, just couple hours I ran it, and it happened 3 times. a straight windows restart ISLC not running and it didn't happen.

custom timer unchecked
global thingy checked

See if it happen when it purge the memory

could you add maybe a folder that add all the EXE in the folder instead adding one by one? it should make my life so much easier just adding the RAZER folders and the program should just pick all EXE not to release them from memory because I have no other way.

So it's not possible to release purge the memory when those specific services or EXE files running? damn the program is unusable because those services will always run to use the Razer Haptic Frejya, it doesn't work without it, and clearing the ram makes it stop working as it buffer some memory to the audio

I think you misunderstood how the exclusion work. When the app detect 1 of the .exe executing, the memory purge won't happen at all. It's not a per process cleanup. So if you put an .exe that always run on your system in the exclusion list, ISLC will never purge the standby list at all.
But if ISLC really cause the issue, and you have an .exe always present, than if you exclude only 1 of it's exe its the same as not running ISLC at all.

Also, I know others people who run this app without an issue with ISLC. So it could be something else. Stop using ISLC completely for a few days and see if the issue come back.

[ArtemGT69]

for some reason version 1.0.3.5 crash after a few seconds but older version (1.0.3.4) doesn't crash maybe it's because it tries to check for updates?

[Wagnard]

for some reason version 1.0.3.5 crash after a few seconds but older version (1.0.3.4) doesn't crash maybe it's because it tries to check for updates?

Can you see any error log in the windows event viewer nder application related to this crash ?

[Xornado]

Hello, I want to report a bug with 1.0.3.5. Yesterday I helped an friend to set up his PC. We did a fresh install of Win 11 25H2.

The Problem ist that after a reboot Intelligent standby list cleaner forget every setting and not start minimized. It does pop up and not even run while all settings are gone.

Today I have removed my 1.0.3.4 Version and replaced it with 1.0.3.5 and now I've exactly the same issue on my System.

Can I get the old 1.0.3.4 somewhere?