Intelligent standby list cleaner (ISLC) v1.0.2.1 Released

Post Reply
DonCrime
Posts: 7
Joined: Fri Oct 19, 2018 12:27 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by DonCrime » Fri Oct 19, 2018 1:54 pm

Windows 10 1809 Build 17763.55

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 947
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by Wagnard » Fri Oct 19, 2018 2:15 pm

DonCrime wrote:
Fri Oct 19, 2018 1:54 pm
Windows 10 1809 Build 17763.55
Try this:
Ensure that the counters are not disabled in the registry


The counters may be disabled via registry settings. Please check the following registry locations to ensure that the counters have not been disabled.

HKLM\System\CurrentControlSet\Services\%servicename%\Performance

%servicename% represents any service with a performance counter. For example: PerfDisk, PerfOS, etc.


There may be registry keys for "DisablePerformanceCounters" in any of these locations. As per the following TechNet article, this value should be set to 0. If the value is anything other than 0 the counter may be disabled.

To rebuild all Performance counters including extensible and third-party counters, type the following commands at an Administrative command prompt. Press ENTER after each command.

Rebuilding the counters:
cd c:\windows\system32
lodctr /R
cd c:\windows\sysWOW64
lodctr /R

Resyncing the counters with Windows Management Instrumentation (WMI):
WINMGMT.EXE /RESYNCPERF

Stop and restart the Performance Logs and Alerts service.
Stop and restart the Windows Management Instrumentation service.

DonCrime
Posts: 7
Joined: Fri Oct 19, 2018 12:27 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by DonCrime » Fri Oct 19, 2018 2:26 pm

I have these steps running the program starts and then works synonymous ... but when I close the program or reboot the situation is as before :(

Rebuilding the counters:
cd c:\windows\system32
lodctr /R
cd c:\windows\sysWOW64
lodctr /R

Resyncing the counters with Windows Management Instrumentation (WMI):
WINMGMT.EXE /RESYNCPERF

Stop and restart the Performance Logs and Alerts service.
Stop and restart the Windows Management Instrumentation service.

User avatar
Wagnard
Site Admin
Posts: 947
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by Wagnard » Fri Oct 19, 2018 2:30 pm

DonCrime wrote:
Fri Oct 19, 2018 2:26 pm
I have these steps running the program starts and then works synonymous ... but when I close the program or reboot the situation is as before :(

Rebuilding the counters:
cd c:\windows\system32
lodctr /R
cd c:\windows\sysWOW64
lodctr /R

Resyncing the counters with Windows Management Instrumentation (WMI):
WINMGMT.EXE /RESYNCPERF

Stop and restart the Performance Logs and Alerts service.
Stop and restart the Windows Management Instrumentation service.
If it's working correctly after doing the previous procedure, than something is breaking the counters when you are rebooting. This can be anything, anti-virus, some applications that start with your system.
Can't tell, you will have to check what program. Is causing this as ISLC required theses and cannot be fixed by me.

The reason it worked for you on older versions is because I was using different and imprecise way to get memory information.

DonCrime
Posts: 7
Joined: Fri Oct 19, 2018 12:27 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by DonCrime » Fri Oct 19, 2018 2:35 pm

yesterday it still worked without problems today no longer (then I have to look what it is :)

User avatar
Wagnard
Site Admin
Posts: 947
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by Wagnard » Fri Oct 19, 2018 3:02 pm

DonCrime wrote:
Fri Oct 19, 2018 2:35 pm
yesterday it still worked without problems today no longer (then I have to look what it is :)
In a future version, I'll add some more error handling so it won't crash silently and instead pop a box with some error / reasons of why it crashed

MattP598
Posts: 1
Joined: Fri Oct 19, 2018 3:20 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.0.7 Released

Post by MattP598 » Fri Oct 19, 2018 3:22 pm

Wagnard wrote:
Sat Oct 13, 2018 1:15 pm
Michoko wrote:
Sat Oct 13, 2018 12:35 pm
Very good idea, thank you for this nice piece of software!

I'd like to run ISLC at startup (but only for a given user). I tried to put a shortcut to the program here:

C:\Users\MyName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

But when I log in Windows 10, ISLC is not launched. I tried to create a bat file, but the long name of the EXE seems to cause an issue. I put the following command:

start "Intelligent standby list cleaner ISLC.exe"

but it just opens a new command line window. If I rename the EXE to just "ISLC.EXE", then the start command works, but for some reason, the settings are not saved.

Ideally, it would be great to have an option to run the program at startup (for the current user). If it's not possible, renaming the EXE to just "ISLC.EXE" might help with creating a batch file?

Thank you very much!
ISLC require administrator right to run.
for starting the application at a user logon, I suggest you use the TaskScheduler. you can set for witch user and set it to run with admin privilege.
Or you could just right click on the .exe, go to the compatibility tab, click on change settings for all users and check run this with administrator privileges.

avrion
Posts: 1
Joined: Fri Oct 19, 2018 3:40 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by avrion » Fri Oct 19, 2018 3:55 pm

Hi,

thank you very much for the program, it works great.
I do however have a little bug-report.
With W10 1809 you can specifically increase the font size of windows (not overall dpi) and well the picture below shows what that looks like.

Annotation.png
You do not have the required permissions to view the files attached to this post.

User avatar
Wagnard
Site Admin
Posts: 947
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.0.8 Released

Post by Wagnard » Fri Oct 19, 2018 4:13 pm

avrion wrote:
Fri Oct 19, 2018 3:55 pm
Hi,

thank you very much for the program, it works great.
I do however have a little bug-report.
With W10 1809 you can specifically increase the font size of windows (not overall dpi) and well the picture below shows what that looks like.


Annotation.png
Thanks, I'll see what I can do.

DonCrime
Posts: 7
Joined: Fri Oct 19, 2018 12:27 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.0.9 Released

Post by DonCrime » Sat Oct 20, 2018 4:29 pm

Hey Wagnard the Programm in the new Version is working now :)

Thank You :)

Post Reply