Intelligent standby list cleaner (ISLC) v1.0.1.8 Released

Post Reply
luckz
Posts: 1
Joined: Thu Jul 04, 2019 12:30 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by luckz » Thu Jul 04, 2019 12:33 pm

Is this a known issue on the older version?
islc.png
(seems to happen a lot when updating big[?] Steam games)
You do not have the required permissions to view the files attached to this post.

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Sponsor

Sponsor
 

User avatar
Wagnard
Site Admin
Posts: 917
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by Wagnard » Thu Jul 04, 2019 12:36 pm

luckz wrote:
Thu Jul 04, 2019 12:33 pm
Is this a known issue on the older version?

islc.png

(seems to happen a lot when updating big[?] Steam games)
Humm never encountered this on my end.
If you can repro this and also give me a screenshot of task manager memory usage.

But before that, use the latest version as this could. Be an old and resolved issue.
Thanks

willybony
Posts: 2
Joined: Thu Jul 04, 2019 7:06 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by willybony » Thu Jul 04, 2019 7:15 pm

In the version v1.0.1.3, the Polling Rate is for the mouse? Why Polling Rate(ms) instead of Polling Rate (Hz)?

I tested it with Logitech G203 and polling rate doesnt change, stuck in 1000hz always.

Thank you for this nice piece of software.

User avatar
Wagnard
Site Admin
Posts: 917
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by Wagnard » Thu Jul 04, 2019 7:16 pm

willybony wrote:
Thu Jul 04, 2019 7:15 pm
In the version v1.0.1.3, the Polling Rate is for the mouse? Why Polling Rate(ms) instead of Polling Rate (Hz)?

I tested it with Logitech G203 and polling rate doesnt change, stuck in 1000hz always.

Thank you for this nice piece of software.
No not at all, it's the rate that the application will check the memory status.

willybony
Posts: 2
Joined: Thu Jul 04, 2019 7:06 pm

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by willybony » Thu Jul 04, 2019 7:24 pm

Wagnard wrote:
Thu Jul 04, 2019 7:16 pm

No not at all, it's the rate that the application will check the memory status.
Ok understood, thanks.

Kuliman
Posts: 2
Joined: Fri Jul 05, 2019 5:43 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by Kuliman » Fri Jul 05, 2019 5:51 am

I decided to use this program, it works, but does not want to clean automatically, but manually everything works fine, I tried version 2 1.0.1.0 and 1.0.1.3 and only manual cleaning works there and there, what can I do?
You do not have the required permissions to view the files attached to this post.

User avatar
Wagnard
Site Admin
Posts: 917
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by Wagnard » Fri Jul 05, 2019 9:56 am

Kuliman wrote:
Fri Jul 05, 2019 5:51 am
I decided to use this program, it works, but does not want to clean automatically, but manually everything works fine, I tried version 2 1.0.1.0 and 1.0.1.3 and only manual cleaning works there and there, what can I do?
From the screenshot, it is normal it doesn't clean, you have more than 1024mb free memory.
Both conditions must be met.

Kuliman
Posts: 2
Joined: Fri Jul 05, 2019 5:43 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.3 Released

Post by Kuliman » Sat Jul 06, 2019 4:29 am

Wagnard wrote:
Fri Jul 05, 2019 9:56 am
Kuliman wrote:
Fri Jul 05, 2019 5:51 am
I decided to use this program, it works, but does not want to clean automatically, but manually everything works fine, I tried version 2 1.0.1.0 and 1.0.1.3 and only manual cleaning works there and there, what can I do?
From the screenshot, it is normal it doesn't clean, you have more than 1024mb free memory.
Both conditions must be met.
Ok thanks, I just thought that it was malfunctioning, but it turns out that my brain did not work properly ...

oldfart
Posts: 1
Joined: Wed Jul 10, 2019 8:04 am

Re: Intelligent standby list cleaner (ISLC) v1.0.1.5 Released

Post by oldfart » Wed Jul 10, 2019 8:14 am

Hi, thanks for the tool. I used to clear the standby list when needed with Sysinternals' Rammap, but this is much easier.
I have a small typo to report, see the yellow marked part in the screenshot below.

Capture.JPG
You do not have the required permissions to view the files attached to this post.

User avatar
Wagnard
Site Admin
Posts: 917
Joined: Sat Jul 04, 2015 5:18 pm
Location: 127.0.0.1
Contact:

Re: Intelligent standby list cleaner (ISLC) v1.0.1.5 Released

Post by Wagnard » Wed Jul 10, 2019 3:15 pm

oldfart wrote:
Wed Jul 10, 2019 8:14 am
Hi, thanks for the tool. I used to clear the standby list when needed with Sysinternals' Rammap, but this is much easier.
I have a small typo to report, see the yellow marked part in the screenshot below.


Capture.JPG
Opps, thanks for reporting.

Post Reply