I just used Display Driver Uninstaller (DDU) v18.0.0.9, then after installing fresh drivers and enabling my NICs, I went back into DDU, and selected "Set Windows Device Installation Settings to Default", but I received the message "No change was made. Windows Device Installation Settings were already set to Default.".
Is this feature no longer used?
I am running Windows 10 64-bit with an NVIDIA GeForce card.
Set Windows Device Installation Settings to Default
-
Dypsis
- Posts: 3
- Joined: Wed Mar 20, 2019 10:05 pm
-
Wagnard
- Site Admin
- Posts: 1837
- Joined: Sat Jul 04, 2015 5:18 pm
- Location: 127.0.0.1
- Contact:
Re: Set Windows Device Installation Settings to Default
The feature is now optional, check the option.Dypsis wrote: ↑Wed Mar 20, 2019 10:16 pm I just used Display Driver Uninstaller (DDU) v18.0.0.9, then after installing fresh drivers and enabling my NICs, I went back into DDU, and selected "Set Windows Device Installation Settings to Default", but I received the message "No change was made. Windows Device Installation Settings were already set to Default.".
Is this feature no longer used?
I am running Windows 10 64-bit with an NVIDIA GeForce card.
-
Dypsis
- Posts: 3
- Joined: Wed Mar 20, 2019 10:05 pm
Re: Set Windows Device Installation Settings to Default
Ah, Advanced Options.
Thanks.
Thanks.
-
Dypsis
- Posts: 3
- Joined: Wed Mar 20, 2019 10:05 pm
Re: Set Windows Device Installation Settings to Default
I see that the clean GeForce Experience cache option is also gone.
By the way.
I am just trying the NVIDIA DCH drivers for the first time. All seems good.
By the way.
I am just trying the NVIDIA DCH drivers for the first time. All seems good.